As long as the brake trigger wire is not connected to the anti-theft device, the effect of canceling the automatic lock can be achieved. This wire is generally a thinner orange wire. After the main door is opened, it will not be automatically locked, that is, the door that the driver gets in the car will not be automatically locked if the power key is turned on once, and it will not be locked if the power key is turned on and the main door is not removed. Yes, that function should be lifted.
Condition analysis
1. Generally, the anti-theft device has an automatic locking function, which is to prevent you from accidentally pressing the remote control unlocking button instead of going to the car door. If you do not go to the car door within 30 seconds, it will automatically lock , Is to protect the safety of your belongings.
2. If the lock is not automatically locked, and you forget to lock it back, then not everyone can open it and enter the car. If you press the button to prevent it and don’t want it to lock automatically, you can open the side door and close it again, and it won’t lock automatically. If you find it troublesome, cut the trigger wire of the side door. (It is recommended not to cancel for safety reasons)
3. Automatic locking function: anti-theft, locking quickly after driving, preventing traffic jams and being robbed by sliding doors when waiting for traffic lights, which can play a certain role in safety precaution. It can protect passengers with children in the car and prevent the car door wrench from being opened when the car is driving.
Automatic locking function, anti-theft, locking quickly after driving, preventing traffic jams and being robbed by sliding doors when waiting for traffic lights, which can play a certain role in safety precautions. It can protect passengers with children in the car and prevent the car door wrench from being opened when the car is driving.
About car alarm
Car anti-theft device is a high-tech anti-theft product integrating GSM network digital mobile communication technology and GPS satellite positioning technology. It is a new generation of car anti-theft product following one-way anti-theft devices and two-way anti-theft devices. It uses the mobile communication network to completely solve the problem of distance limitation and easy cracking that ordinary anti-theft devices cannot solve.
In addition to the functions of ordinary anti-theft devices, it also has functions such as mobile phone control, SMS positioning, remote monitoring, remote alarm, and full voice prompt operation. No matter when and where, you can monitor your car as long as you call it to get the best protection.
working principle
In electronic car anti-theft devices, there is generally an integrated chip with some door openings. When a trigger voltage is applied, the opening and closing door opens and outputs a positive voltage to the drive circuit, inferring the actuator and alarm circuit. The applied voltage is completed by sensors or switches, which is concealed and indestructible.
Electronically controlled cars are generally the original anti-theft devices. The principle is roughly the same as that of electronic anti-theft devices, except that the circuits are connected to each other, mainly to lock the starting system. In addition to having stronger functions than electronic anti-theft devices, network anti-theft devices can also send theft to the owner's mobile phone, and have the ability to lock and activate the system. Its mobile phone positioning can locate the vehicle within a certain range.
GPS satellite positioning anti-theft device function is even stronger, almost integrates all anti-theft functions, and can use satellites to accurately locate within 5 meters, that is, in front of you. Some of its sensors use wireless sensing, which is difficult to destroy.
The product is made of synthetic silicone rubber vulcanized at high temperature, never changing, high flexibility, tear, product life can reach 50 years, has good insulation performance, insulation strength ≧20KV/mm, insulation resistance ≧10, reasonable design, easy installation.
The buckle structure is easy to disassemble and reuse during maintenance. High and low temperature resistance, can be used in the range of -60℃-190℃. Uv resistance, excellent hydrophobicity, aging resistance, meet the long-term outdoor operation.
Applications:
Provide
insulation and protection for various incoming and outgoing connection points
of insulation switches, vacuum switches and fuses.
Features:
2.Radiation cross linking materials (Polyolefin or EPDM rubber ).
3.Quick and easy installation.
4.Avoid short circuit and leakage.
5.Facilitate routine inspection and maintenance.
6.Resistant to moisture and dust.
7.Meet RoHS Stand.
8.Customized
We are the professional manufacturer of Electrical Tapes,Insulating Tape and Bushing Cover in China for more than 25 years,if you want to know more information about our company and products, please visit our website.
Bushing Cover For Switchges,Transformer Protection Sheath,Transformer Protection Sheath Dress,Heat Shrinkable Insulation Cover For Transformer
CAS Applied Chemistry Materials Co.,Ltd. , https://www.casac1997.com