Lamp

Electrodeless lamp belongs to the fourth generation of lighting products, no filament, no electrode, is the abbreviation of electrodeless gas discharge fluorescent lamp. Compared with traditional light sources such as energy-saving lamps, metal halide lamps, and high-pressure sodium lamps, it has significant advantages. Electromagnetic induction lamp is a high-tech product developed through comprehensive application of the latest scientific and technological achievements in optics, power electronics, plasma science, magnetic materials and other fields. It is a high luminous efficiency, long life, high color rendering, representing the future of lighting technology. The development of new light sources. Electrodeless lamp is divided into high-frequency stepless lamp and low-frequency stepless lamp. Its light emission principle is basically the same, but there are also big differences.

Features
1. There are no filaments or electrodes in the bulb, and the product has a service life of more than 60000 hours.
2, high luminous efficiency, high-frequency induction lamp 70Lm / W, low-frequency induction lamp 75Lm / W.
3, color rendering index of 80 or more, the use of high-quality three-color phosphor, the color is not distorted.
4, wide voltage work, the voltage can work normally in 185V-255V.
5, high frequency operating frequency is 2.65MHz, low frequency operating frequency is 230Hz, safety is not stroboscopic effect
6, light decline is small, after 20000 hours lumen maintenance rate up to 80%
7, instant start and restart time are less than 0.5 seconds
8, start the temperature is low, adapt to the temperature range, minus 25 degrees, can start and work normally.
9, power factor up to 0.95 or more.
10, safety and reliability, green, truly maintenance-free, free replacement.

Advantages and disadvantages
1. The high-frequency electrodeless lamp has a small volume, and the appearance of the light bulb changes more. It can be equipped with many lamps and lanterns. The old lamps can also be used with a slight modification, and the light efficiency is higher under the same power. The nanometer aluminum oxide coating prevents the electromagnetic radiation. However, the disadvantages of high-frequency electrodeless lamps are also obvious. The heat dissipation is not good, resulting in low power. In order to achieve stable quality, the average manufacturer only achieves 200W.
2, low-frequency electrodeless lamp power can be made large, high-power low-frequency electrodeless lamp is other common conventional lighting can not exist, the coupler external, large lamp, so the cooling effect is also very good. However, because of its large size, the number of configurable lamps is also very small and causes some lumen loss. In addition, a small amount of electromagnetic leakage is caused by the external coupler.