25W-150W Single Output Switching Power Supply (NED/T Series) , Power LED

Model NO.: WSP-NED/T
Modulation System: PWM
In-Out: Lifting Pressure Type
Power Supply Voltage: 1.5-36V
Pack Sealing Size: SC-70
Brand: OEM
Protection: Short Circuit / Overload / Over Voltage
Model NO.: WSP-NED/T
Modulation System: PWM
In-Out: Lifting Pressure Type
Power Supply Voltage: 1.5-36V
Pack Sealing Size: SC-70
Brand: OEM
Protection: Short Circuit / Overload / Over Voltage
 25W-150W  Single output switching power supply(NED/T Series), power LED
Features:
*Universal AC input / full range (NES/D-100,NES-150 AC input selectable by switch)
*Protections:Short circuit / Overload / Over voltage
*Built-in over temperature protection for NES-15
*Cooling by free air convection
*Small size, high power density
*Low size, high reliability
*100% full load burn-in test
*Most economical low wattage solution with safety certificates
*2 years warranty
Series No. Model No. Specification
AC input range AC inrush Current(Max.) DC adjustable range Overload protection Over voltage protection Withstand Voltage Safety standards EMC standards Connector
input/output
Output Voltage tolerance Ripple&noise Efficiency MAX  Size(mm)
NED-35 NED-35A 85~264VAC;120~370VDC Cold start,
45A/230VAC
by potentiometer for single output 10% 110%~150% hiccup mode, auto-recovery 115%~135% rated output voltage,shut off I/P-O/P:3KVAC,I/P-FG:2KVAC, O/P-FG:0.5KVAC.1minute UL60950-1,EN60950-1(NES-150 only),GB4943(NES only),EN60950-1 EN55022 class B,EN61000-3-2,3,EN61000-4-2,3,4,5,6,8,11,GB9254(NES only) Terminal Block for input and output 5V,0.5~5A ±2% 80mV 78.0% 32W 99x97x36
12V,0.1~1.5A ±6% 120mV
NED-35B 5V, 0.5~4A ±2% 80mV 78.0% 35W 99x97x36
24V,0.2~1.3A ±6% 200mV
NED-50 NED-50A 85~264VAC;120~370VDC Cold start,
45A/230VAC
5V,1~6A ±2% 80mV 79.0% 54W 99x97x36
12V,0.3~3A ±6% 120mV
NED-50B 5V,1~6A ±2% 80mV 82.0% 54W 99x97x36
24V,0.2~2A ±6% 200mV
NED-75 NED-75A 85~264VAC;120~370VDC Cold start,
45A/230VAC
5V,1~8A ±2% 80mV 78.0% 71W 159x97x38
12V,0.3~4A ±6% 120mV
NED-75B 5V,1~6A ±2% 80mV 81.0% 73W 159x97x38
24V,0.2~3A ±6% 200mV
NED-100 NED-100A 115/230VAC Cold start,
45A/230VAC
-5%~+10%(NES-100/150);
CH1~5%~+10%(NES-100)
115%~135% hiccup mode, auto-recovery I/P-O/P:3KVAC,I/P-FG:2KVAC, O/P-FG:0.5KVAC.1minute UL60950-1,EN60950-1(NES-150 only),GB4943(NES only),EN60950-1 EN55022 class B,EN61000-3-2,3,EN61000-4-2,3,4,5,6,8,11,GB9254(NES only) Terminal block for input and output 5V,2~10A ±2% 80mV 80.0% 100W 199x98x38
12V,0.7~7A ±10% 120mV
NED-100B 5V,1~10A ±2% 80mV 82.0% 100W 199x98x38
24V,0.3~3.5A ±8% 200mV
NED-100C 12V,0~8A ±2% 120mV 80.0% 99W 199x98x38
5V,0~3A ±3% 80mV
NED-100D 24V,0~4A ±2% 120mV 82.0% 99W 199x98x38
5V,0~3A ±3% 80mV
NET-35 NET-35A 85~264VAC;120~370VDC Cold start,
45A/230VAC
by potentiometer for single output 10% 115%~135% rated output voltage,shut off 5V,0.5~4A ±2% 80mV 78.0% 30W 99x97x36
12V,0.1~1.5A ±6% 120mV
-5V,0.1~0.5A ±6% 120mV
NET-35B 5V,0.5~4A ±2% 80mV 82.0% 100W 99x97x36
12V,0.1~0.5A ±6% 120mV
-12V,0.1~0.5A ±6% 120mV
NET-35C 5V,0.5~3.5A ±2% 80mV 79.0% 35W 99x97x36
15V,0.1~1.5A ±8% 150mV
-15V,0.1~0.5A ±8% 150mV
NET-35D 5V,0.5~3.5A ±2% 120mV 79.0% 37W 99x97x36
24V,0.1~1A ±8% 200mV
12V,0.1~1A ±8% 120mV
NET-50 NET-50A 85~264VAC;120~370VDC Cold start,
45A/230VAC
I/P-O/P:3KVAC,I/P-FG:2KVAC, O/P-FG:0.5KVAC.1minute UL60950-1,EN60950-1(NES-150 only),GB4943(NES only),EN60950-1 EN55022 class B,EN61000-3-2,3,EN61000-4-2,3,4,5,6,8,11,GB9254(NES only) Terminal block for input and output 5V,0.5~5A ±2% 80mV 76.0% 47W 129x98x38
12V,0.2~2.5A ±6% 120mV
-5V,0.1~0.7A ±5% 120mV
NET-50B 5V,0.6~5A ±2% 80mV 78.0% 50W 129x98x38
12V,0.2~2.5A ±6% 120mV
-12V,0.1~0.7A ±5% 120mV
NET-50C 5V,0.6~5A ±2% 80mV 78.0% 50W 129x98x38
15V,0.1~2A ±8% 150mV
-15V,0.1~0.7A ±5% 150mV
NET-50D 5V,0.6~5A ±2% 120mV 80.0% 51W 129x98x38
24V,0.1~1.5A ±8% 200mV
12V,0.1~1.5A ±6% 120mV
NET-75 NET-75A 85~264VAC;120~370VDC Cold start,
45A/230VAC
5V,0.6~7A ±2% 80mV 76.0% 47W 129x98x38
12V,0.2~3.5A ±6% 120mV
-5V,0.1~0.7A ±5% 120mV
NET-75B 5V,0.6~7A ±2% 80mV 78.0% 50W 129x98x38
12V,0.2~3.5A ±6% 120mV
-12V,0.1~0.7A ±5% 120mV
NET-75C 5V,0.6~5A ±2% 80mV 78.0% 50W 129x98x38
15V,0.1~2A ±8% 150mV
-15V,0.1~0.7A ±5% 150mV
NET-75D 5V,0.6~5A ±2% 120mV 80.0% 51W 129x98x38
24V,0.1~1.5A ±8% 200mV
12V,0.1~1.5A ±6% 120mV
 25W-150W  Single output switching power supply(NED/T Series), power LED
Features:
*Universal AC input / full range (NES/D-100,NES-150 AC input selectable by switch)
*Protections:Short circuit / Overload / Over voltage
*Built-in over temperature protection for NES-15
*Cooling by free air convection
*Small size, high power density
*Low size, high reliability
*100% full load burn-in test
*Most economical low wattage solution with safety certificates
*2 years warranty
Series No. Model No. Specification
AC input range AC inrush Current(Max.) DC adjustable range Overload protection Over voltage protection Withstand Voltage Safety standards EMC standards Connector
input/output
Output Voltage tolerance Ripple&noise Efficiency MAX  Size(mm)
NED-35 NED-35A 85~264VAC;120~370VDC Cold start,
45A/230VAC
by potentiometer for single output 10% 110%~150% hiccup mode, auto-recovery 115%~135% rated output voltage,shut off I/P-O/P:3KVAC,I/P-FG:2KVAC, O/P-FG:0.5KVAC.1minute UL60950-1,EN60950-1(NES-150 only),GB4943(NES only),EN60950-1 EN55022 class B,EN61000-3-2,3,EN61000-4-2,3,4,5,6,8,11,GB9254(NES only) Terminal block for input and output 5V,0.5~5A ±2% 80mV 78.0% 32W 99x97x36
12V,0.1~1.5A ±6% 120mV
NED-35B 5V, 0.5~4A ±2% 80mV 78.0% 35W 99x97x36
24V,0.2~1.3A ±6% 200mV
NED-50 NED-50A 85~264VAC;120~370VDC Cold start,
45A/230VAC
5V,1~6A ±2% 80mV 79.0% 54W 99x97x36
12V,0.3~3A ±6% 120mV
NED-50B 5V,1~6A ±2% 80mV 82.0% 54W 99x97x36
24V,0.2~2A ±6% 200mV
NED-75 NED-75A 85~264VAC;120~370VDC Cold start,
45A/230VAC
5V,1~8A ±2% 80mV 78.0% 71W 159x97x38
12V,0.3~4A ±6% 120mV
NED-75B 5V,1~6A ±2% 80mV 81.0% 73W 159x97x38
24V,0.2~3A ±6% 200mV
NED-100 NED-100A 115/230VAC Cold s

Cylindrical Cell-holders

Antenk battery holders for Cylindrical Cells
Thru Hole and Surface Mount or with Wire Leads
For A, AA, AAA, 1/2AA, CR2, CR123A, 1/3N,C, D, N, 12 Volt, 18350, 18650, 26650 Batteries

Antenk Battery Holders for Cylindrical Cells Type

Plastic Cost Effective Holders, Polyproplene base, coil spring contacts
PC Mountable and wire lead for on or off board applications
PC Connetcor for quick connection to automated board assemblies
Snap On Connector for off board connection using 9V connection
High Performance Leaf Spring Holders, High Temp. Nylon Base
SMT Holders, Gold plated contacts
THM Holders, Tin-Nickel Plated Contacts
Solder Lug Holders, for remote wiring applications
High Performance Coil Spring Holders, High Temp. Nylon Base
SMT Holders, Gold plated contacts
THM Holders, Tin-Nickel Plated Contacts
cylindrical battery holders

cell-Battery Holder,Cylindrical Cell Holders,Cylindrical Battery Bracket,Custom Cylindrical Cell Holders,Battery Holders Cylindrical,18650 Battery Holders,alkaline batteries Holders

ShenZhen Antenk Electronics Co,Ltd , https://www.antenksocket.com