800 Times LC Mu Ferrule Fiber Optic Cleaner

800 times LC MU ferrule fiber optic cleaner

This series fiber optic cleaner is an 1.25mm ferrule cleaner,mainly used to clean LC & MU ferrule,or any ferrule with 1.25mm size,LC fiber cleaner is easy using,just one click,the ferrule is cleaned,and with more than 800 times life.Below are the details of this cleaner.

Features:

• Ergonomic, comfortable design with single action cleaning
• Precise mechanical action delivers consistent cleaning results
• Automatically advance ensures each clean is performed with fresh cleaning tape
• Low cost per clean

Applications:

• Cleans connectors on jumpers and in adapters
• Available for 1.25 mm (LC/MU) Connectors
• Up to 800 cleans
• A must-have for field technicians 

Fiber Optic Connector Inspection Steps:

1.Clean: Clean the end face of all components in each mated pair to avoid contamination before connection.

2.Inspect: Inspect each mated pair with a Fiber Inspection Microscope to verify end face cleanliness. If contamination is present, re-clean and re-inspect each mated pair. (Warning: Invisible laser radiation might be emitted from disconnected fibers or connectors. Do not stare into beams or view directly with optical instruments.)

3.Connect: Make each connection immediately after successful visual inspection of the mated pair.

4.RE-Clean: If you disconnect the connections, please re-clean and re-inspect all components before you connect.



Would you like some LC fiber cleaner for testing??Please leave me an inquiry or contact me directly.

Contact : Ada     +8615927519783       800 times LC MU ferrule fiber optic cleaner

This series fiber optic cleaner is an 1.25mm ferrule cleaner,mainly used to clean LC & MU ferrule,or any ferrule with 1.25mm size,LC fiber cleaner is easy using,just one click,the ferrule is cleaned,and with more than 800 times life.Below are the details of this cleaner.

Features:

• Ergonomic, comfortable design with single action cleaning
• Precise mechanical action delivers consistent cleaning results
• Automatically advance ensures each clean is performed with fresh cleaning tape
• Low cost per clean

Applications:

• Cleans connectors on jumpers and in adapters
• Available for 1.25 mm (LC/MU) Connectors
• Up to 800 cleans
• A must-have for field technicians 

Fiber Optic Connector Inspection Steps:

1.Clean: Clean the end face of all components in each mated pair to avoid contamination before connection.

2.Inspect: Inspect each mated pair with a Fiber Inspection Microscope to verify end face cleanliness. If contamination is present, re-clean and re-inspect each mated pair. (Warning: Invisible laser radiation might be emitted from disconnected fibers or connectors. Do not stare into beams or view directly with optical instruments.)

3.Connect: Make each connection immediately after successful visual inspection of the mated pair.

4.RE-Clean: If you disconnect the connections, please re-clean and re-inspect all components before you connect.



Would you like some LC fiber cleaner for testing??Please leave me an inquiry or contact me directly.

Contact : Ada     +8615927519783      

High Power LED Street Light

High Power LED Street Light,High Power LED Street Lamp,90W LED Street Light

LED Corn Light Co., Ltd. , http://www.cnoutdoorlight.com