Original Meanwell Hlg-40h Series Single Output Waterproof IP67 LED Driver

Posted on

  • Model NO.: HLG-40H
  • Output Type: DC
  • Color: White
  • Internal Structure: On-Off Type
  • Connection: Screw
  • Brand: Meanwell
  • Trademark: Meanwell
  • Specification: Universal
  • HS Code: 8504401400
  • Usage: Laptop, Switching, Mobile Phone, Game Player, Digital Camera, Phone, Display, LED Strip
  • Certification: TUV, RoHS, UL, ISO9001, CCC
  • Type: OEM
  • Power Source: Full-Bridge Type
  • Bluetooth Standard: 1.1
  • Size: 171*61.5*36.8mm
  • Transport Package: Paper Carton
  • Origin: Guangdong China (Mainland)
OriginaOriginal Meanwell HLG-40H Series Single Output Waterproof IP67 LED Driver Features:

1. Universal AC input / Full range (up to 305VAC)
2. Built-in active PFC function
3. Protections: Short circuit / Over current / Over voltage / Over temperature
4. Cooling by free air convection
5. OCP point adjustable through output cable or internal potentiometer
6. IP67 / IP65 design for indoor or outdoor installations
7. Class 2 power unit
8. Three in one dimming function (1~10Vdc or PWM signal or resistance)
9. Suitable for LED lighting and moving sign applications
10. Compliance to worldwide safety regulations for lighting
11. Suitable for dry / damp / wet location
12. 7 years warranty (Note.10)



Original Meanwell HLG-40H Series Single Output Waterproof IP67 LED Driver Specifications:

 
MODEL HLG-40H-12 HLG-40H-15 HLG-40H-20 HLG-40H-24 HLG-40H-30 HLG-40H-36 HLG-40H-42 HLG-40H-48 HLG-40H-54
OUTPUT DC VOLTAGE 12V 15V 20V 24V 30V 36V 42V 48V 54V
CONSTANT CURRENT REGION Note.4 7.2 ~12V 9 ~ 15V 12 ~ 20V 14.4 ~ 24V 18 ~ 30V 21.6 ~ 36V 25.2 ~ 42V 28.8 ~ 48V 32.4 ~ 54V
RATED CURRENT 3.33A 2.67A 2A 1.67A 1.34A 1.12A 0.96A 0.84A 0.75A
RATED POWER 39.96W 40.05W 40W 40.08W 40.2W 40.32W 40.32W 40.32W 40.5W
RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 200mVp-p 200mVp-p 200mVp-p 200mVp-p 300mVp-p 300mVp-p
VOLTAGE ADJ. RANGE Note.6 10.8 ~ 13.5V 13.5 ~ 17V 17 ~ 22V 22 ~ 27V 27 ~ 33V 33 ~ 40V 40 ~ 46V 44 ~ 53V 49 ~ 58V
CURRENT ADJ. RANGE Can be adjusted by internal potentiometer A type only
2 ~ 3.33A 1.6 ~ 2.67A 1.2 ~ 2A 1 ~ 1.67A 0.8 ~ 1.34A 0.67 ~ 1.12A 0.58 ~ 0.96A 0.5 ~ 0.84A 0.45 ~ 0.75A
VOLTAGE TOLERANCE Note.3 ±2.5% ±2.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% ±1.0%
LINE REGULATION ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
LOAD REGULATION ±2.0% ±1.5% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
SETUP, RISE TIME       Note.8 500ms, 80ms at full load      230VAC / 115VAC
HOLD UP TIME (Typ.) 16ms/230VAC       16ms/115VAC at full load
INPUT VOLTAGE RANGE       Note.5 90 ~ 305VAC       127 ~ 431VDC
FREQUENCY RANGE 47 ~ 63Hz
POWER FACTOR (Typ.) PF>0.98/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
TOTAL HARMONIC DISTORTION THD< 20% when output loading>=60% at 115VAC/230VAC input and output loading>=75% at 277VAC input
EFFICIENCY (Typ.) 86.5% 86.5% 88% 88% 88.5% 88.5% 88.5% 89.5% 89.5%
AC CURRENT (Typ.) 0.43A / 115VAC       0.24A / 230VAC       0.23A / 277VAC
INRUSH CURRENT(Typ.) COLD START 50A(twidth=210μs measured at 50% Ipeak) at 230VAC
MAX. No. of PSUs on 16A 12 units (circuit breaker of type B) / 20 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT <0.75mA / 277VAC
PROTECTION OVER CURRENT          Note.4 95 ~ 108%
Protection type : Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE 15 ~ 21V 18 ~ 24V 23 ~ 30V 28 ~ 35V 35 ~ 43V 41 ~ 49V 48 ~ 58V 54 ~ 65V 59 ~ 68V
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE Shut down o/p voltage, re-power on to recover
ENVIRONMENT WORKING TEMP. -40 ~ +70ºC (Refer to "Derating Curve")
WORKING HUMIDITY 20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY -40 ~ +80ºC, 10 ~ 95% RH
TEMP. COEFFICIENT ±0.03%/ºC (0 ~ 60ºC)
VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY &
EMC		 SAFETY STANDARDS   Note.7 UL8750(type"HL") , CSA C22.2 No. 250.0-08 (except for 48V, 54V), EN61347-1, EN61347-2-13 independent, IP65 or IP67,
J61347-1, J61347-2-13 approved ; design refer to UL60950-1, TUV EN60950-1, EN60335-1
WITHSTAND VOLTAGE I/P-O/P:3.75KVAC   I/P-FG:2KVAC   O/P-FG:1.5KVAC
ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25ºC/ 70% RH
EMC EMISSION Compliance to EN55015, EN61000-3-2 Class C (>=60% load) ; EN61000-3-3
EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, EN55024, light industry level (surge 4KV), criteria A
OTHERS MTBF 336.5Khrs min.    MIL-HDBK-217F (25ºC)
DIMENSION 171*61.5*36.8mm (L*W*H)
PACKING 0.73Kg; 20pcs/15.6Kg/0.8CUFT
NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Please refer to "DRIVING METHODS OF LED MODULE".
5. Derating may be needed under low input voltages. Please check the static characteristics for more details.
6. A type only.
7. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1, FCC part18.
8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
9. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
10. Refer to warranty statement.
11. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently
connected to the mains.
 
 
 

If you need a set to offer your fiber optic and its connectors protection, then there may different types of Fiber Optic Terminal Boxes burst into your mind. Optical terminal box(OTB) is mounted to in and out side wall of building or pole to distribute and connect optical cable for distribution of subscriber. It is designed with controls that maintain the fiber bending radius throughout the unit on the segregated customer and provider sides.
Our Fiber Optic Terminal Box series includes cabinet, Fiber Splice Closure , Sliding Rack Mount Fiber Patch Panel, wall mount Distribution Box and fiber optic surface mount box(86*86mm type). They all offer good protection either mechanical or environment to optical fiber and connectors inside. For convenient cable management, they provide termination, splicing and storage functions for Fiber Optic Cable systems.

The main material for our fiber optic terminal box is cold rolled steel with powder coating finished. If you need plastic material to keep light but solid, we have PC material products for your option. Such as our Fiber Optic Splice Closure and surface mounting box.

For different application, you can find our product accordingly. Either outdoor or indoor, either for small capacity or large capacity, either for hanging in the air or bury under the earth, either install on the wall or on the desk, you can always find there is one type suitable to you.


Fiber Optic Terminal Box,For the protective connection and storage between cables and pigtails. Supply reliable cable fixing, stripping, and grounding device; Small cubage, unique structure, easy installation.

If you need a set to offer your fiber optic and its connectors protection, then there may different types of fiber optic terminal boxes burst into your mind. Optical Terminal Box(OTB) is mounted to in and out side wall of building or pole to distribute and connect optical cable for distribution of subscriber. It is designed with controls that maintain the fiber bending radius throughout the unit on the segregated customer and provider sides.

Our fiber optic terminal box series includes cabinet, fiber splice closure, sliding rack mount Fiber Patch Panel , wall mount distribution box and fiber optic surface mount box(86*86mm type). They all offer good protection either mechanical or environment to optical fiber and connectors inside. For convenient cable management, they provide termination, splicing and storage functions for fiber optic cable systems.

Fiber Optic Terminal Box

Fiber Optic Terminal Boxes, 24 port Rack Mount Fiber Enclosure, Sliding Rack Mount Fiber Patch Panel, SMC Terminal Cabinet, FTTH Products

NINGBO YULIANG TELECOM MUNICATIONS EQUIPMENT CO.,LTD. , http://www.yltelecom.com