High Quality Fig8 Single Mode Fiber Optic Cable for Aerial (GYTC8S)

Fig8 Single Mode Fiber Optic Cable for Aerial (GYTC8S)


Figure 8 self-support aerial outdoor optical cable GYTC8S
Fiber optical cable GYTC8S1. Self-support aerial2. Anti-crush, PE Sheath3. "8" figure cut section4. Cores: From 2-144
Description
The fibers, 250μ M, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular cable core. After an Aluminum Polyethylene Laminate (APL) moisture barrier is applied around the cable core, this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene (PE) sheath to be figure 8 structure.
Characteristics
@ High tensile strength of stranded wires meet the requirement of self-supporting and reduce the
Installation cost.
@ Good mechanical and temperature performance
@ High strength loose tube that is hydrolysis resistant
@ Special tube filling compound ensure a critical protection of fiber
@ The following measures are taken to ensure the cable watertight:
- Steel wire used as the central strength member
- Loose tube filling compound
- 100% cable core filling
- APL moisture barrier

Standards
GYTC8S cable complies with Standard YD/T 1155-2001 as well as IEC 60794-1.
Optical Characteristics
G. 652 G. 655 50/125μ M 62.5/125μ M
Attenuation @850nm ≤ 3.0 dB/km ≤ 3.0 dB/km
@1300nm ≤ 1.0 dB/km ≤ 1.0 dB/km
(+20° C) @1310nm ≤ 0.36 dB/km ≤ 0.40 dB/km
@1550nm ≤ 0.22 dB/km ≤ 0.23dB/km
@850nm ≥ 500 MHz@km ≥ 200 MHz@km

Bandwidth (Class A) @1300nm ≥ 1000 MHz@km ≥ 600 MHz@km
Numerical Aperture 0.200± 0.015NA 0.275± 0.015NA
Cable Cut-off Wavelength λ CC ≤ 1260nm ≤ 1480nm

Technical Parameters
Cable Type Fiber Count Fillers Cable Weight kg/km Crush Resistance
Tubes Cable Diameter Tensile Strength Bending Radius
Mm Long/Short Term
Long/Short Term N N/100mm Static
/Dynamic
Mm
GYTC8S-2~6 2~6 1 4 9.5× 18.3 218 600/1500 300/1000 10D/20D
GYTC8S-8~12 8~12 2 3 9.5× 18.3 218 600/1500 300/1000 10D/20D
GYTC8S-14~18 14~18 3 2 9.5× 18.3 218 600/1500 300/1000 10D/20D
GYTC8S -20~24 20~24 4 1 9.5× 18.3 218 600/1500 300/1000 10D/20D
GYTC8S-72~96 72~96 8 0 9.5× 18.3 320 600/1500 300/1000 10D/20D
Storage/Operating Temperature: -40° C to + 70° C


Our Services

1. Free samples
2. OEM serviced
3. Best price, Best quality, Best service(we'll reply all our customers in 3 hours, any questons, pls call us at anytime )

Company Information
We're a proffessional factory of cable in Shenzhen China, with 12years of experience in this field and 8years exporting experience.

Employees: 150
Export countries: Europe, the Middle East South America. Like Russia, Ukraine, Brazil, Turkey, Columbia, Saudi Arabia ect
Products: All cables, cable accessories.
Fig8 Single Mode Fiber Optic Cable for Aerial (GYTC8S)


Figure 8 self-support aerial outdoor optical cable GYTC8S
Fiber optical cable GYTC8S1. Self-support aerial2. Anti-crush, PE Sheath3. "8" figure cut section4. Cores: From 2-144
Description
The fibers, 250μ M, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular cable core. After an Aluminum Polyethylene Laminate (APL) moisture barrier is applied around the cable core, this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene (PE) sheath to be figure 8 structure.
Characteristics
@ High tensile strength of stranded wires meet the requirement of self-supporting and reduce the
Installation cost.
@ Good mechanical and temperature performance
@ High strength loose tube that is hydrolysis resistant
@ Special tube filling compound ensure a critical protection of fiber
@ The following measures are taken to ensure the cable watertight:
- Steel wire used as the central strength member
- Loose tube filling compound
- 100% cable core filling
- APL moisture barrier

Standards
GYTC8S cable complies with Standard YD/T 1155-2001 as well as IEC 60794-1.
Optical Characteristics
G. 652 G. 655 50/125μ M 62.5/125μ M
Attenuation @850nm ≤ 3.0 dB/km ≤ 3.0 dB/km
@1300nm ≤ 1.0 dB/km ≤ 1.0 dB/km
(+20° C) @1310nm ≤ 0.36 dB/km ≤ 0.40 dB/km
@1550nm ≤ 0.22 dB/km ≤ 0.23dB/km
@850nm ≥ 500 MHz@km ≥ 200 MHz@km

Bandwidth (Class A) @1300nm ≥ 1000 MHz@km ≥ 600 MHz@km
Numerical Aperture 0.200± 0.015NA 0.275± 0.015NA
Cable Cut-off Wavelength λ CC ≤ 1260nm ≤ 1480nm

Technical Parameters
Cable Type Fiber Count Fillers Cable Weight kg/km Crush Resistance
Tubes Cable Diameter Tensile Strength Bending Radius
Mm Long/Short Term
Long/Short Term N N/100mm Static
/Dynamic
Mm
GYTC8S-2~6 2~6 1 4 9.5× 18.3 218 600/1500 300/1000 10D/20D
GYTC8S-8~12 8~12 2 3 9.5× 18.3 218 600/1500 300/1000 10D/20D
GYTC8S-14~18 14~18 3 2 9.5× 18.3 218 600/1500 300/1000 10D/20D
GYTC8S -20~24 20~24 4 1 9.5× 18.3 218 600/1500 300/1000 10D/20D
GYTC8S-72~96 72~96 8 0 9.5× 18.3 320 600/1500 300/1000 10D/20D
Storage/Operating Temperature: -40° C to + 70° C


Our Services

1. Free samples
2. OEM serviced
3. Best price, Best quality, Best service(we'll reply all our customers in 3 hours, any questons, pls call us at anytime )

Company Information
We're a proffessional factory of cable in Shenzhen China, with 12years of experience in this field and 8years exporting experience.

Employees: 150
Export countries: Europe, the Middle East South America. Like Russia, Ukraine, Brazil, Turkey, Columbia, Saudi Arabia ect
Products: All cables, cable accessories.

Digital Signage

Digital Signage,Digital Screen Poster,Android Video Players,Digital Signage Display Screen

APIO ELECTRONIC CO.,LTD , https://www.apiodisplays.com