[科科] Which lithium batteries can I carry with my plane?

It can be used as a hand luggage to carry portable electronic devices and backup batteries for laptops, mobile phones, cameras, watches, etc., containing no more than 100Wh (lithowatt hours) of lithium batteries.

1, it is determined if the lithium battery rated capacity of the lithium battery is not marked directly nominal energy Wh (watt-hours), the lithium battery may be rated in terms of energy as follows:

1) If the nominal voltage (V) and nominal capacity (Ah) of the battery are known, the value of the nominal watt hour can be calculated by calculation: Wh = VxAh, the nominal voltage and nominal capacity are usually marked on the battery.

2) If the battery is only marked with milliampere (mAh), divide this value by 1000 to get ampere-hours (Ah).

For example, the nominal voltage of a lithium battery is 3.7V, the nominal capacity is 760mAh, and its rated watt hours are: 760mAh/1000=0.76Ah; 3.7Vx0.76Ah=2.9Wh

2. Protection measures for spare lithium batteries The backup batteries must be individually protected against short circuits (insert the original retail packaging or otherwise insulate the electrodes, such as tape on exposed electrodes or separate each battery into a separate one) Among plastic bags or protective boxes).

3, portable lithium battery can be used for carrying luggage with no more than 100Wh (watt hours) lithium battery notebook computers, mobile phones, cameras, watches and other personal use portable electronic devices and backup batteries boarding.

Generally speaking, the rated energy of the lithium battery of the mobile phone is 3~10Wh; the energy of the lithium battery of the SLR camera is 10~20Wh; the energy of the lithium battery of the portable camera is 20-40Wh; the energy of the lithium battery of the notebook computer is 30-100Wh More than a little. Therefore, lithium batteries in mobile phones, commonly used camcorders, SLR cameras, and most electronic devices such as laptops usually do not exceed the 100Wh limit.

Description of Velcro Cable Sleeve For Cable Harness

Velcro Cable Sleeve is a nonexpandable sleeving woven from monofilament (weft) and multifilament (warp) polyester yarns. It provides a lightweight, costeffective and tough solution for the protection of a wide range of components. Its inherent flexibility allows it to bend, coil and conform to irregular shapes, while its open design allows it to be installed on completed assemblies.

 

Material: Polyester monofilament and multifilament

Operating range: -50 °C  Ã·  150 °C

Melt point: 250°C ± 5

Flammability: VW-1

Approved: RoHS, Halogen free

Standard colours : black, grey

Cutting tool: scissors

Colorful self closing braid wrap for automotive


Self closing velcro Cable Sleeve is a non-expandable sleeve woven from monofilament weft and multi-filament warp.

 It provides a lightweight, cost effective and tough solution for protection of a wide range of wire and cable.

 Its inherent flexibility allows it to be bend, coil and fit with irregular shapes while its open design allows it to be install on finished assemblies quickly.




Velcro Cable Sleeve

Conduit Cable Sleeves,White Fabric Cable Sleeving,Black Fabric Cable Sleeving,Velcro Cable Sleeve For Cable Harness

Shenzhen Huiyunhai Tech.Co.,Ltd , https://www.hyhbraidedsleeve.com