Although the lighting industry market has been generally depressed due to the financial crisis in the past year, as a leading company in the market, technological innovation is often regarded as an important investment. For them, 2010 will be the future of the enterprise. A crucial year for development.
On January 20th, Shanghai Yinghui Lighting released nearly 100 new European lanterns in the five-star hotel in Xi'an Huangcheng, including the high-end Black & Decker and the simple and modern style of Baizhaowang, which is worth 100 million yuan. The signing amount has once again become the focus of attention in the industry.
It is understood that at the launch of the new product conference, Yinghui Lighting's 3D simulation technology displayed its two brands, including Black & White and Baizhao Wang, and simulated lighting effects and single store management software. At the same time, in the Yinghui Group's own hotel Xi'an Huangcheng Haomen five-star hotel, special planning and arrangement of more than 200 square meters of physical new products, covering the new extension of the best-selling products of Black & Decker and Windsor Castle, Williamsburg, Byzantium Louvre Baizhao Wang: Gypsy, Anjou, Spencer, Princeton, Florence and other new products. It is worth noting that at the press conference, Yinghui Lighting highlighted the penetration of invisible channels and showed the latest engineering catalogue and many successful cases. For example, Dubai Bo, China Airlines, Japan Hilton Hotels and other five-star hotels, clubs and other appreciation, have been praised by the participating dealers. According to industry analysts, Yinghui Lighting has gradually cooperated with dealers to target customers to home improvement, tooling, design institutes, etc. in the past few years, and achieved nearly 40% growth rate. All this shows that Yinghui Lighting has been intimately contacted by the invisible channel designer team, and the release of the first project catalogue will fuel the dominance of its own invisible channel.
Xu Zhisong, executive vice president of Shanghai Yinghui Lighting, said in the meeting that for Yinghui, the key to the tremendous vitality and strong development is the investment of the R&D department to ensure that the two brands of Yinghui are unique in the market. . It is also because of continuous innovation that Yinghui can always maintain a leading position in this market. The reporter noticed that in this national distributor conference, nearly 200 dealers, designers and media from all over the country were attracted to pay close attention. Everyone joined hands to witness the excellent performance of Yinghui Lighting in 2010.
Introduction of PCB Stencil
Framed PCB stencil is laser-cut solder paste stencil. It is mounted in a stencil frame forever using a mesh border to tightly stretch the stencil foil taut in the frame. Framed SMT Stencil has smooth aperture walls and could be used for 16 mil pitch and below, also for micro BGAs. Framed Laser Stencil is made for mass production screen printing on circuit board.
Framed PCB Stencil Specification
|
Framed PCB Stencil Area |
Maximum Squeegee Area |
|
300mm*400mm (11.81inch*15.75inch) |
120mm*220mm (4.72inch*8.66inch) |
|
370mm*470mm (14.57inch*18.5inch) |
200mm*300mm (7.87inch*11.81inch) |
|
400mm*600mm (15.75inch*23.62inch) |
220mm*400mm (8.66inch*15.75inch) |
|
400mm*700mm (15.75inch*27.56inch) |
220mm*500mm (8.66inch*19.69inch) |
|
400mm*800mm (15.75inch*31.5inch) |
220mm*600mm (8.66inch*23.62inch) |
|
400mm*900mm (15.75inch*35.43inch) |
220mm*700mm (8.66inch*27.56inch) |
|
400mm*1000mm (15.75inch*39.37inch) |
220mm*800mm (8.66inch*31.5inch) |
|
400mm*1200mm (15.75inch*47.24inch) |
220mm*1000mm (8.66inch*39.37inch) |
|
400mm*1400mm (15.75inch*55.12inch) |
220mm*1200mm (8.66inch*47.24inch) |
|
420mm*520mm (16.54inch*20.47inch) |
240mm*340mm (9.45inch*13.39inch) |
|
450mm*550mm (17.72inch*21.65inch) |
270mm*370mm (10.63inch*14.57inch) |
|
500mm*800mm (19.69inch*31.5inch) |
320mm*600mm (12.6inch*23.62inch) |
|
500mm*1200mm (19.69inch*47.24inch) |
320mm*1000mm (12.6inch*39.37inch) |
|
550mm*650mm (21.65inch*25.59inch) |
340mm*440mm (13.39inch*17.32inch) |
|
584mm*584mm (23inch*23inch) |
380mm*380mm (15inch*15inch) |
|
736mm*736mm (29inch*29inch) |
480mm*480mm (19inch*19inch) |
Frameless PCB stencil also referred to as foils are laser cut solder paste stencils designed to work with stencil tensioning systems known as reusable stencil frames. It does not need to be permanently glued in a frame. Frameless SMD Stencil is significantly cheaper than framed stencil and provides cost-effective storage while still offer good quality. It is suitable for Prototype PCB Circuit Board assembly.
PCB Stencil
PCB Stencil,SMT Stencil,SMD Stencil,Laser Stencil
JingHongYi PCB (HK) Co., Limited , http://www.pcbjhy.com