Advantages:
         1.Our Company Has Great Reputation In Domestic Market.
              2.Good Quality Guaranteed With Reasonable Price.
              3.OEM, ODM Are Welcomed.
              4.Goods Will Be Delivered On Time.
              5.Factory Selling Directly
Description
ZN63A(VS1)-12 series of  indoor vacuum circuit breaker is used for indoor 12kv switchgear,it is suitable to control and protect transmission and distribution system such as electric network equipment and industrial&minning industry etc as their protection and control unit.
It can match with KYN28(GZS1),XGN and GG1-A series of switchgears.The products meet standards of GB1984-2003,this seriesof products include:VCB truck,isolation truck and fuse truck etc.
1.This series of VCB is used integrated design for operating mechanism and VCB body with reasonable,beautiful and compact arrangement.
2.This series of VCB adopted vertical insulation house against impact due to different weather,it can effectively prevent VIS against damage by exterior factors.
3.With two kinds of installation unit:fixed type and withdrawable type,it can meet different assembling requirements between switchgear and breaker.
Applying ambient conditions
1.Ambient temperature:-10ºC~+40ºC.
2.The height above sea level:≤1000m(besides the special requirements).
3.Relative humidity:the average humidity of a day should be no more than 95%;the average humidity of a month should be no more than 90%.
4.Saturated vapour pressure:the average pressure of a day should be no more than 2.2kPa;the average pressure of a month should be no more than 1.8kPa.
5.Earthquake intensity:not exceed 8 degrees.
6.It should be installed in the places without fire,explosion,serious filth,chemical erosion and violent vibration.
Technical Parameters
| Item | Unit | Parameter | ||||
| Rated Voltage | kV | 11/12 | ||||
| Rated Current | A | 630~1250 | 630~1250 | 630~1250 | ||
| Rated Short-circuit Breaking Current | kA | 20 | 25 | 31.5 | ||
| Rated Short-circuit Making Current | kA | 50 | 63 | 80 | ||
| Rated Peak Withstand Current | kA | 50 | 63 | 80 | ||
| 4s Rated Short-time Withstand Current | kA | 20 | 25 | 31.5 | ||
| Rated Insulation Level | 1min Power Frequency Withstand Voltage (crest) | kV | 65 | |||
| Lightning Impulse Withstand Voltage (peak) | kV | 125 | ||||
| Rated Operating Sequence | Â | O-0.3s-C O-180s-CO | ||||
| Mechanical Life | times | 10000 | ||||
| Rated Short-circuit Current Breaking Times | times | 50 | ||||
| Rated Closing Voltage of Operator (DC) | V | 110, 220 | ||||
| Rated Opening Voltage of Operator (DC) | V | 110, 220 | ||||
| Clearance Between Open Contacts | mm | 11± 1 | ||||
| Over travel of Contacts | mm | 3.5± 0.5 | ||||
| Three-phase Opening/Closing Synchronization | ms | ≤ 2 | ||||
| Closing Bouncing Time | ms | ≤ 2 | ||||
| Average Opening Speed | m/s | 0.9~0.12 | ||||
| Average Closing Speed | m/s | 0.4~0.8 | ||||
| Opening Time | Highest Operating Voltage | s | ≤ 0.05 | |||
| Lowest Operating Voltage | s | ≤ 0.08 | ||||
| Closing Time | s | 0.1 | ||||
| Main Loop Resistance of Each Phase | μ Ω | 60 | 50 | |||
| Total Thickness of Permissible Wear of Moving and Static Contacts | mm | 3 | ||||
Applying ambient conditions
1.Ambient temperature:-10ºC~+40ºC.
2.The height above sea level:≤1000m(besides the special requirements).
3.Relative humidity:the average humidity of a day should be no more than 95%;the average humidity of a month should be no more than 90%.
4.Saturated vapour pressure:the average pressure of a day should be no more than 2.2kPa;the average pressure of a month should be no more than 1.8kPa.
5.Earthquake intensity:not exceed 8 degrees.
6.It should be installed in the places without fire,explosion,serious filth,chemical erosion and violent vibration.
Silicone Rubber Keypads are the most widely used form of switch technology today. We offer reliability, long life and design flexibility. Conductive rubber switches and keypads were originally developed for the electronics industry to meet the increasing demand for inexpensive momentary switches. Conductive rubber keypads became desirable because they look and feel like traditional push-button style switches, but do not have their inherent disadvantages.
Since their introduction over 30 years ago, conductive rubber switches and keypads have gained enormous popularity and wide-range acceptance because of their reliability, long operational life and excellent tactile feel.
Innovative key coatings for our silicone rubber keypads are silicone, parylene, and Dura (Hard Coat). Silicone rubber keypads can be designed for applications exposed to water and hydrocarbons. Enhanced graphics and lighting options allow your product to incorporate features not found on standard silicone.
Silicone Rubber Keypads
Silicone Rubber Keypads,CNC Machine Silicone Rubber Keypads,Colorful Silicone Rubber Keypads,Calculator Silicone Rubber Keypads
Dongguan LuPhi Electronics Technology Co., Ltd. , http://www.luphiprint.com