Recently, the National Automobile Standardization Technical Committee Lighting Standardization Committee organized a seminar on the draft of the Intelligent Front Lighting System (AFS) Standard (Second Draft) in Changsha City, Hunan Province. He Yuntang, deputy director of the Lighting Standardization Committee, members of the working group and invited representatives Twenty people attended the meeting; the meeting was chaired by Xu Mou, the secretary general of the Lighting Subcommittee.
At the meeting, the standard preparation instructions were first introduced by the representative of the first drafting unit of the standard, Shanghai Xiaohao Auto Lamp Co., Ltd., and then the members of the working group discussed the "Intelligent Front Lighting System (AFS) Standard Draft (Second Draft)" one by one. Finally, the AFS Standards Working Group made arrangements for the next step, decided to form a standard consultation draft around June, and organized relevant units to conduct verification tests on the Intelligent Front Lighting System (AFS) standard at the appropriate time.
In addition, the technical requirements related to vehicle flashing brake (ESS) were discussed. Since the development of vehicle flashing brake (ESS) related requirements involves changes to GB4785 and GB7258, it is necessary to call the Ministry of Public Security. The representatives of the committee members discussed it in order to reach a consensus and facilitate the improvement of vehicle safety standards.
Edit: Sunflower
FUNCTION DESCRIPTION
Countdown socket has an AC outlet, the maximum can output 230 V16A of power, there are two control modes, that is, countdown off and countdown on. It is convenient to control the equipment which needs to switch off or turn on AC. improve the safety of the use of some equipment and save more energy.
SET Timer
1,Countdown plug in the socket, all indicator lights red flash three times, at this time the socket has no output, for the normal state, into the countdown state. Click the button, the first red light up, the socket output after an hour off, and then short press the button can set the socket timing of 2 H.4H.6H.8H.10H.OFF.
2,Long press button 3s, all indicator lights green flash three times, at this time the socket has output, for the regular open state, into the countdown on state. Click on the button, the first green light on, the socket is closed an hour later, and then press the button to set the socket countdown 2 H.4H.6H.8H.10H.OFF.
3,Press button 3 longer S, all indicator lights red light flash 3 times again into countdown mode.
4,Select the required countdown time mode, the corresponding mode countdown lights up, start countdown until the end of the countdown time. The outlet that controls the output will start or stop the output.
5,After the countdown starts, the time indicator will change automatically from high to low until the countdown is over.
NOTE:
1,Check that the power connection is good.
2,Use only indoors and in dry places.
3,This product does not convert AC voltage.
4,Maximum load not exceeding 16A 3680W.
5,Grounding is required for safety.
6,Any questions, please contact the electrician.
countdown timer socket, countdown timer plug, Countdown digital timer, Countdown socket, countdown switch socket
NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsocket.com