LED drive power supply nine performance characteristics requirements

The electricity grid and rules required drive power LED characteristics, design and in the choice of LED drive power to take into account the following nine performance characteristics requirements:

1. High reliability

Especially like the driving power supply of LED street lamps, it is installed at high altitude, the maintenance is inconvenient, and the maintenance cost is also large.

2. high efficiency

LEDs are energy-saving products, and the efficiency of driving power supplies is high. It is especially important for structures where the power supply is installed in the luminaire. Since the luminous efficiency of the LED decreases as the temperature of the LED increases, the heat dissipation of the LED is very important. The power supply has high efficiency, its power consumption is small, and the heat generated in the lamp is small, which reduces the temperature rise of the lamp. It is beneficial to delay the light decay of LEDs.

3. High power factor

The power factor is the grid's load requirements. Generally, there are no mandatory indicators for electrical appliances below 70 watts. Although the power factor of a single power consumer with low power has little effect on the power grid, at night, everyone lights up, and the similar load is too concentrated, which will cause serious pollution to the power grid. For 30 watts to 40 watts of LED driver power, it is said that in the near future, there may be certain indicators for power factors.

4. Drive mode

There are two types of traffic: one is a constant voltage source for multiple constant current sources, and each constant current source supplies power to each LED separately. In this way, the combination is flexible, and all the LED faults do not affect the work of other LEDs, but the cost will be slightly higher. The other is direct constant current supply, with LEDs running in series or in parallel. Its advantage is that the cost is lower, but the flexibility is poor, and it is necessary to solve a certain LED failure without affecting the operation of other LEDs. These two forms coexist for a while. Multi-channel constant current output power supply mode will be better in terms of cost and performance. Perhaps it is the mainstream direction in the future.

5. Surge protection

The ability of LEDs to withstand surges is relatively poor, especially against reverse voltage capability. It is also important to strengthen protection in this area. Some LED lights are installed outdoors, such as LED street lights. Due to the start of the grid load and the induction of lightning strikes, various surges will be invaded from the grid system, and some surges will cause LED damage. Therefore, the LED driver power supply must have the ability to suppress the intrusion of surges and protect the LEDs from damage.

6. Protective function

In addition to the conventional protection function, the power supply preferably increases the LED temperature negative feedback in the constant current output to prevent the LED temperature from being too high.

7. Protection

The external installation of the lamp, the power supply structure should be waterproof and moisture-proof, and the outer casing should be light-resistant.

8. The life of the drive power is adapted to the life of the LED.

9. To comply with safety and electromagnetic compatibility requirements.

Ridging Machine for Agriculture:


ridging machine for Agriculture can improve the ground temperature and increase the air permeability of the soil, and our ridgers are versatile and used in farm land which is welcomed by ploughing farmers for its plurality of unique advantages. These ridging tractors are of small resistance and high efficiency. Our ridging machine also has advantages of racing against time, saving labor, working efficiency and low cost etc.


Ridging Machine for Agriculture02


Ridging Machine for Agriculture Technical Parameters:

1. Weight: 240KG

2. Operating width: 1400 mm

3. Power: 36.8-51.8 KW

4. Size: 920*1690*1020 (mm)



Typical Applications: can be worked in paddy field, dry land, hilly ground and green house.

 

If you have any questions, please contact us directly. Crawler tractor for agriculture are produced by Hunan Nongfu with high quality and good appearance.

welcome you can visit our factory for inquiry, please send mail directly to us.






Ridging Machine for Agriculture

Agricultural Machinery, Ridging tractor, Ridger, ridging machine

Hunan NongFu Machinery&Electronic.Co., Ltd. , http://www.nfagmachine.com