OSTAR Compact surface mount LEDs form the basis for a new design of daylight-free running lights that do not rely on light spots and are the perfect source for light guide systems. (Source: Osram)
On March 9, 2010, China Telecom's OSTAR Compact LED was specially developed for automotive headlamp applications. This high-power LED is designed for use with a light guide-based daytime running light (DRL). Its compact size and ability to drive high current loads make it ideal for existing and new headlight designs. In addition to the common point LED lighting solutions, linear or two-dimensional designs can be created with a small number of semiconductor light sources.
The proportion of LEDs used in daytime running light applications is on the rise and is no longer limited to top models. Today, these energy-saving light sources are rapidly becoming the preferred source of light for mid-range models. With the introduction of this surface mount OSTAR Compact, OSRAM Opto Semiconductors has further expanded its lineup of LED products for daytime running light applications. Now, it is precisely because high-current LEDs such as OSTAR Headlamp, OSLON ECE have a well-classified color category that fully meets ECE color requirements and produces illumination that matches the color of the front of the car, so the various cars produced by the headlight manufacturer The LED product portfolio is the perfect match.
The OSTAR Compact has a traction power of 5 W, an operating current of 1.4 A and a typical brightness of 300 lm, while its 2 mm2 chip provides high illumination. With this compact, high-power light source, the light guide system can be built with just two LEDs. This powerful component also has an optimum heat dissipation of 6 K/W, making it ideal for use in high temperature areas in the front of the car. In addition, OSTAR Compact does not require a reflector or lens to operate.
Peter Knittl, Director of Automotive LEDs at Osram Opto Semiconductors' German Headquarters, said: “From simple light bars to complex 3D versions, the design of the light guides is varied. To introduce new forms of design and point-to-day driving. An alternative to lamp design, the most important thing you need is a compact, high-power light source."
Thanks to its surface mount, OSTAR Compact is extremely easy to operate. It has the same longevity as a car without the need for replacement, which saves costs. The red and yellow version of OSTAR Compact can also be used for signal illumination.
On March 9, 2010, China Telecom's OSTAR Compact LED was specially developed for automotive headlamp applications. This high-power LED is designed for use with a light guide-based daytime running light (DRL). Its compact size and ability to drive high current loads make it ideal for existing and new headlight designs. In addition to the common point LED lighting solutions, linear or two-dimensional designs can be created with a small number of semiconductor light sources.
The proportion of LEDs used in daytime running light applications is on the rise and is no longer limited to top models. Today, these energy-saving light sources are rapidly becoming the preferred source of light for mid-range models. With the introduction of this surface mount OSTAR Compact, OSRAM Opto Semiconductors has further expanded its lineup of LED products for daytime running light applications. Now, it is precisely because high-current LEDs such as OSTAR Headlamp, OSLON ECE have a well-classified color category that fully meets ECE color requirements and produces illumination that matches the color of the front of the car, so the various cars produced by the headlight manufacturer The LED product portfolio is the perfect match.
The OSTAR Compact has a traction power of 5 W, an operating current of 1.4 A and a typical brightness of 300 lm, while its 2 mm2 chip provides high illumination. With this compact, high-power light source, the light guide system can be built with just two LEDs. This powerful component also has an optimum heat dissipation of 6 K/W, making it ideal for use in high temperature areas in the front of the car. In addition, OSTAR Compact does not require a reflector or lens to operate.
Peter Knittl, Director of Automotive LEDs at Osram Opto Semiconductors' German Headquarters, said: “From simple light bars to complex 3D versions, the design of the light guides is varied. To introduce new forms of design and point-to-day driving. An alternative to lamp design, the most important thing you need is a compact, high-power light source."
Thanks to its surface mount, OSTAR Compact is extremely easy to operate. It has the same longevity as a car without the need for replacement, which saves costs. The red and yellow version of OSTAR Compact can also be used for signal illumination.
Ejector Header Connector,Ejectors Header Smt Type Connectors,Ejectors Four Row Foot Type Connector,Ejector Wire To Board Connector
Shenzhen Hongyian Electronics Co., Ltd. , https://www.hongyiancon.com