OFweek smart home network smart home smart features - Internet of Things. Connecting a home-use device for control requires a set of communication systems between objects and objects. The smart home communication system is mainly divided into two categories: wired communication and wireless communication.
The smart home industry has an interesting phenomenon. Foreign large-scale smart home companies basically choose wired communication technology, and China's rising smart home has basically chosen to stand in the wireless communication technology camp. Then the following Xiao Bian gives you a comparison of the difference between wired and wireless.
Wired more famous like Crestron, Savant, Vinay, ABB and so on. If you are not bad, value stability, want to be a full-scale smart home, then choose cable. Take Crestron as an example, high product stability, maturity and peace of mind, high plasticity, but the corresponding price is high, the integrator design and development capabilities are higher. (No more introduction here, interested partners can refer to relevant information)
If you choose wireless, it is better to have Nanjing Wulian, Ziguang Wulian, Oruibo, Xiaomi, AmazingBOX, Rongshida and so on. The wireless is more selective, the price is relatively cheaper than wired, and the most important thing is that there is no need for wiring decoration. Take the AmazingBOX as an example, smart home 3.0 concept leader, the host can be compatible with third-party products (but also when the router) can be installed according to different needs of smart home products, DIY scenarios, optional rich, affordable.
In fact, with the development of smart homes, wireless and wired will eventually form a unified standard, and smart homes will become more and more mature.
Fingerprint Lock Motor introduction:
Basic security work, lock body responsible for the security door lock body responsible for opening and closing lock, the lock body Lock Motor is of crucial importance.
Functions: it is widely used in various intelligent locks, such as Shared bicycle lock, fingerprint lock, glass lock, safe lock, hotel lock, family lock, inductive smart lock, etc
Features:Fingerprint Lock Motoris based on micro precision reducer development, small intelligent micro precision reducer can do 10 mm in diameter, is widely used in safe, locks, smart locks, sensor intelligent lock;
This kind of motor has the characteristics of low noise, low energy consumption, small volume, light quality, high precision, large torque and durability
Method of use: the best stable in horizontal plane, installed on the Fingerprint Lock Motoroutput shaft parts, cannot use a hammer to knock, knock prone to press into the dc Fingerprint Lock Motor drive, may cause damage to internal components, and cannot be used in the case of blocked.
Operating temperature range:
lock motor should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a lock motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
Fingerprint Lock Motor should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
The longevity of Fingerprint Lock Motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.
â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you
Looking forward to your inquiry. Welcome to our factory.
Fingerprint Lock Motor,Motor For Fingerprint Lock,Gear Motor For Fingerprint Lock,Dc Motor For Fingerprint Lock
Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com