The Finite MPO fiber optic connector is a passive component that connects optical cables. It is widely used in many projects and plays an important role in optical fiber transmission systems. With the advent of the information age, the coverage of optical fibers is increasing, and it is used to achieve permanent fixation between optical fibers and optical fibers and between optical fibers and active devices.
The MPO (mulTIfiber push-on) fiber connector is a multi-core, multi-channel pluggable connector. See FIG. 1, which is a structure of the MPO fiber connector of the IEC standard (IEC 61754-7). The MPO connector has a male and female connector, a male connector with two guide pins, a housing at each end, and an adapter. Male connector has two guide legs and at most 72 fiber holes, but the most common is 12 holes. When mating the connector, the spring installed at the rear end of the ferrule will provide a force for the ferrule to make it and the adapter. Locked up. The guide pins of the ferrule serve to limit the relative positions of the connectors and ensure that the order of the optical fiber mating is correct. In order to obtain good insertion loss, the position of the guide pin and the accuracy of the work required are very demanding and must reach a precision of 1 μm.
7/8" mini female angle connectors used for power support .The ingress protection is available and rated to IP 67, these connectors are ideally suited for industrial control networks where small Sensors are required. Connectors are either factory TPU over-molded or panel receptacles supplied with sold-cup for wire connecting or with PCB panel solder contacts. Field attachable / mountable Connector is also available for your choice.
Mini Male Connector,7/8" Connector,Field Wireable Male Connector,Mini Connector 5 Pin
Kunshan SVL Electric Co.,Ltd , https://www.svlelectric.com