Safety production education and training content - Solutions - Huaqiang Electronic Network

SMD aluminum electrolytic capacitor

The probe high frequency needle JT-CT has a needle core that can pass 3 amp high frequency needle

Specializing in the production of led lamp beads 1W blue high power LED Sanan 30mil excellent micro LE

Brand AVX TPSE226M035R0125 Low impedance tantalum capacitor AVX 22

Specializing in the production of LED chip LED LED lamp beads

There are many forms of safety production education and training. "Three-level" safety education is a form of safety education, and it is also a system of hungry education for new employees. So, what is "three-level" safety education? New employees pass" What can be learned at the third level according to education and training?
First, what is "three-level" safety education?
The "three-level" safety education system is the basic education system for enterprise safety education. The object of education is the newly-entered personnel, including newly-entered employees, temporary workers, seasonal workers, agents and interns.

"Three-level" safety education refers to factory (mine) level safety production education, workshop (work section, district, team) level safety education, team level safety education.
2. "Three-level" safety education and training content
1. Factory (mine) level safety production education and training Main content Safety production basic knowledge The unit safety production rules and regulations.
Labor discipline.
Risk factors, preventive measures and emergency measures for workplaces and jobs.
Related accident cases, etc.
2. Workshop (work section, district, team) level safety production education and training Main content The safety production status and rules and regulations of this workshop (work section, district, team).
Risk factors, preventive measures and emergency measures for workplaces and workplaces.
Accident cases, etc.
3. The main content of the team-level safety production education and training post according to the operating procedures.
Production equipment, safety devices, labor protection products (use distance) performance and correct use.
Accident cases, etc.
3. The organization and implementation of the "three-level" safety education of the enterprise (mine) level is generally organized by the cognition department and the safety and technical management department to implement the workshop. (Workshop, district, team) level safety production education and training by the workshop (section) , district, team) person in charge

The workshop safety management personnel are responsible for organizing and implementing. The team-level safety education is organized by the team leader and the safety officer, with the class teacher to organize and implement the relationship between the "three-level" safety education and other safety education.
"Three-level" safety education is the most basic safety education. In addition to receiving "three-level" safety education and training, new employees must also receive regular safety education, return-to-work education, and "four new" education.

It is necessary for employees who are engaged in special operations to receive special safety training for special operators and obtain qualification certificates for special operators before they can be employed. "Three-level" safety education cannot be used.

For other education, other education can't replace "three-level" safety education. Only through these education and training can employees continuously improve their safety awareness and skills to achieve safe production.
5. Special operations education and other forms of education
1. What is a special operator? Special workers refer to the place where they work, the equipment they operate, the operation content has a greater risk, it is prone to casualties, or it is easy for the operator himself, others and surrounding facilities.

According to the operator who caused the major hazard. Because the special operator has a high risk in the production process, once an accident occurs, it will bring a large loss. Therefore, it must be for the special operation personnel.

Special safety technical knowledge education and safe operation technical training are required, and after rigorous examinations, the examinations are qualified before they can be employed.
2. Special operations and personnel range of electrical operations. Including power generation, power transmission, power transformation, with electrician, electrical equipment installation, operation, maintenance (maintenance), test workers, mine downhole electric fitter.
Metal welding, cutting operations. Contains welders, cutters.
Lifting machinery (including elevator) operations. Drivers with lifting machinery (including elevators), sorcerers, signal pilots, installation and maintenance workers.
Motor vehicle driving in the enterprise. Drivers of all kinds of motor vehicles in the production area and construction site of the enterprise, docks, freight yards, etc.
Ascending erection work. erection, removal, maintenance, high-rise building surface cleaners with more than 2 meters.
Boiler operation (water quality test). Operators with pressure-bearing boilers, boiler water quality testers.
Pressure vessel operation. Pressure vessel cans, inspection workers, transport escorts, large air compressor operators.
Refrigeration operation. Includes refrigeration equipment installers, operators, maintenance workers.
Blasting operations. Includes ground engineering blasting, underground blasting.
Mine ventilation operations. Includes main fan machine operator, gas pumping, ventilation safety tester, wind measurement dust collector.
Mine drainage operations. Main mine drainage pump workers, tailings dam operators.
Mine safety inspection operations. Including safety inspection workers, gas inspection workers, electrical equipment explosion-proof inspection workers.
Mine lifting and transportation operations. Main hoist operator, (upper, downhill) winch operator, fixed belt conveyor operator, signal worker, tanker.
Mining (peeling) operations. Contains the shearer driver, the driver of the roadheader, the driver of the rock drill, the driver of the rock drill.
Mine rescue operations.
Dangerous goods operations. Operators containing dangerous chemicals, civilian explosives, radioactive materials, transport escorts, storage custodians.
Other operations approved by the National Bureau.
3. The basic conditions necessary for special operations personnel must be at least 18 years of age.
Good health, no obstacles to disease and victory in the corresponding types of work.
Junior high school (including junior high school) above the level of education, with the safety technology knowledge of the corresponding types of work, participate in the national safety technology theory and practical assessment and pass the test.
Other conditions that meet the characteristics of the corresponding work type.
4. Contents of safety education and training for special operators.
Safety technology theory. Includes basic knowledge of safety and theoretical knowledge of safety technology.
Practical operation. Includes basic knowledge of safety and theoretical knowledge of safety technology.
Actual operation. Includes practical operation and practical skills.
5. Special operations personnel review training content typical accident case analysis.
Relevant laws, regulations, standards, norms.
New technologies, new processes, and new materials related to this type of work.
Review and summarize the lessons learned from personal safety production after the last evidence collection.
6. Main content of regular safety education and training.
Safety in production of new knowledge, new technology, safe production laws and regulations.
Risk factors, preventive measures and emergency measures for workplaces and jobs.
Accident cases, etc.
7. The main content of "Four New" safety education and training is based on the factual new technology, new technology or the use of new equipment, new materials, and targeted safety production education training for employees.