Panasonic TC52DL500D light display rear-projection to do their own low-cost to get the rear-projection bulb - android - Phones Developers

Factory direct 5050LED lamp beads blue 5050 lamp beads 5050 blue lamp 5050

I spent 150 yuan to buy a Panasonic TC52DL500D light-emitting rear-projection in the broken place. I thought that I would buy it and play it. If I can repair it, I can't fix it and throw it. Check that the projection bulb bursts. Check the bulb price on the Internet 450---1200. If you think too expensive, you will not fix it, but you will not be reconciled. Hey, it is estimated that the psychology of doing this is the same. Since I am engaged in car electronic control maintenance, I would like to think about whether I can use the car Xenon bulb to change it, because the car Xenon bulb is cheaper and brighter, a 50 yuan can be fixed. "My light bulb did not cost money", so I found a better quality Xenon bulb, color temperature 6000K, [practical proof that the color temperature is higher, there is no obvious change in the image] remove the lamp cup and lampshade of the original machine The light bulb is loaded and tried. The lamp driver of the original machine can light the xenon lamp very smoothly. Carefully remove the broken wick with a blade and screwdriver and load the xenon bulb. Pay attention to the positioning of the wick. Since the wick is fixed on the lamp cup, it is fixed with the lamp mud. Unfortunately, I don't. I fixed it with putty for automotive sheet metal painting. Note that the installed xenon bulb is 35W and the original machine is 120W. As for the brightness, let's see. This kind of TV was originally a thing that was eliminated. To put it bluntly, it was a play. Long story short. Made a few effects [Figure. . The picture is real.