The reason why the grease will dry out is like this. . -Huaqiang Electronic Network

Grease can be used for lubrication, mainly by the oil contained in the grease. In use, if the base oil is lost, it will cause the grease to dry out, resulting in poor lubrication. There are four main reasons for the grease to dry out: 1. Grease is contaminated with grease into the dust, and the grease is mixed with other grease. If the two greases are incompatible, it will also cause grease. Dry out, so different greases can't be mixed and kept clean. 2. When the high temperature causes the base oil to lose heat, the base oil in the grease will evaporate. Therefore, the grease used at high temperatures requires a low evaporation rate of the base oil. 3, the oil grease will flow out some oil itself, it is a normal phenomenon, but if the oil is lost, it will accelerate the loss of the base oil and make the grease dry. Centrifugal force, high temperature, mixing of different greases, poor quality of the grease itself, and vibration of the grease will increase the oil content of the grease. 4, the grease is oxidized and oxidized, the grease will dry out, causing the grease to be oxidized due to the failure of the grease to expire, high temperature, grease contamination (mixed with moisture, impurities, etc.), gamma ray radiation, the quality of the grease itself difference.

For reasons of root cause, Changsha Sichen Instrument Technology Co., Ltd. can provide an instrument for detecting the drying of grease;

SC-0122 grease roller stability tester

SC-217A low temperature cone penetration tester

SC-217 grease penetration tester

SC-269 grease million shear tester

SC-0109 grease anti-watering performance tester also has grease dropping point measuring instrument, grease similar viscosity measuring instrument, grease mechanical impurity content measuring instrument, grease evaporation loss measuring instrument, grease steel net oil measuring instrument and many more;
Thank you very much for purchasing the SC series products of Changsha Sichen Instrument Technology Co., Ltd. From this moment, we will accompany you to all aspects of your service and to meet your needs to the greatest extent. We believe that "the service goal of making customers fully satisfied" will regard your identity as a joy of pride and success, and regard this identity as a good opportunity to continue our recognition and recognition. We confirm that "Choose Sichen Instrument is the choice of product quality and service". When you purchase the products of Sichen Instrument, we will provide you with satisfactory full-service, as long as you have a call, the rest Give us all, you will not have any worries. We adhere to the service principle of "integrity, initiative, efficiency, professionalism, perfection". Therefore, we will become a habit of us, and we will do our best to solve problems for you.